|
| -TiteLite- Auto License Plate Light Kit - Domed Head Satin Finish |
TiteLite License Plate Light kits feature a right-angle LED for direct illumination of your license plate. Super bright LEDs are extemely efficient and emit a higher degree of light in a desired location than incandescent lamps. Since there is no filament that can be damaged, LEDs are incredibly durable - virtually shock and vibration-proof!
The clear epoxy covered lens offers waterproof protection.
Temperature resistant
Low power consumption
Low heat output
No damaging UV emissions
Kit contains 2 lights for the top and two bolts for the bottom.
 |
| |
| Item no. 030301 |
Retail: $30.45 (PLUS shipping) |
| Today's Sale Price: $30.45 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Domed Head Style bolts with a notch machined into the head and a light bulb installed to illuminate at a 90 degree angle.
Machined from top quality Stainless Steel the great little lights will find many uses in your motoring world. Designed to used as a license plate light when the stock light has been lost due to modifications.
|
|
|
| WARNING: Laws concerning this product vary from state/province to state/province. Your state/province may prohibit its use on public roads or restrict its use to novelty, show use, off-road areas, or race facility areas only. In some states/provinces off-road uses are also prohibited. The manufacturer and retailer assume no responsibility for any use or application of this product in violation of any applicable law. Before installing this product, please check your state/provincial and local/municipal laws and regulations. |
|
| The Q&A on this Product |
|
|
| QUESTION: Hello
Do I need to place the two leds first in series and then the chain of two parallel to the exisiting tail light? What about polarity?
Kind regards,
Fred |
| ANSWER: The units are polarized, red wire for positive, black wire for negative. If you have a separate set of wires going to the old license plate light, put the two units in parallel and observe the polarity. If there are not separate license plate wires, then you put them in parallel with the taillight circuit by making T-splices. There are no connections in series in any application of these LED units, as that would diminish the intensity of the light output. |
|
| QUESTION: I have just installed a wooden bumper that is 1.75" thick. Will i have to countersink the studs? |
| ANSWER: The threaded portion of the Titelite is 5/16-18 x 3/4". It will work on materials up to 3/8" thick. |
|
| QUESTION: que tan eficientes son estas luses para iluminar la placa trasera del auto comparadas a las de fabrica |
| ANSWER: Estas luces son muy brillantes. La placa trasera de su auto será más visible con luces LED. |
|
| QUESTION: I have heard of needing LED controllers for similar products due to different voltage requirements...will these need such controllers or will they just wire in parallel? I need new lights for my motorcycle plate. |
| ANSWER: They splice straight to your existing wiring. |
|
| QUESTION: I will be installing these on my ZZR600 (2007) with the tail-light integrator an undertail kit. There currently is no license plate wire stock. The plate is lit by a clear opening in the brake light. Is there another way to get power to the this light? |
| ANSWER: Just attach the license plate light wires in parallel with the taillight wires - the goal is to have the plate lit anytime the lights are on. |
|
| QUESTION: comes with four lights??? |
| ANSWER: No, two lights on the top that shine down on the license plate and two matching bolts for the bottom. |
|
| QUESTION: Will these fit/work on my '05 Honda Civic Ex, Coupe 2 dr on my license plate? |
| ANSWER: They are universal. You just wire them to the existing license plate light wiring. |
|
|
|
| Ask your question here: |
|
| Your email (so we can send you the answer): |
|
|
|
Event Photos
powered by