Cell Saver - Battery Insulation Kit  Item #: 010480  $27.14 DEI's NEW Cell Saver is the Ideal protection for any automotive battery. Batteries are very susceptible to heat and vibration that could cause premature failure and hazardous leaks. Cell Saver is very capable and will absorb and neutralize any damaging leaky battery acids. DEI's Cell Saver's material is capable of withstanding radiant temperatures upto 2000 degrees.
	Floor and Tunnel Shield 2' x 21" (3.5 square feet)  Item #: 050501  $38.95 This revolutionary material adds a new dimension to control heat with minimal clearance needed, only 3/16 inch! The Floor and Tunnel Shield is constructed utilizing an embossed 10 mil aluminum face bonded to a 1/8 inch composite fiberglass insulation and is backed with an aggressive adhesive that holds past 450 degree F. Capable of handling direct temperatures up to 1750 degrees f. Tough enough for under vehicle applications. This unique material can also block out up to 50% of unwanted road noise. Great sound barrier 1750 degree direct heat capabilities Self adhesive for easy installation Unique material works in harsh environments Can be cut with tin snips to any shape
	Floor and Tunnel Shield 4' x 21" (7 square feet)  Item #: 050502  $78.95 This revolutionary material adds a new dimension to control heat with minimal clearance needed, only 3/16”! The Floor and Tunnel Shield is constructed utilizing an embossed 10 mil aluminum face bonded to a 1/8” composite fiberglass insulation and is backed with an aggressive adhesive that holds past 450º F. Capable of handling direct temperatures up to 1750 degrees f. Tough enough for under vehicle applications. This unique material can also block out up to 50% of unwanted road noise. Great sound barrier 1750 degree direct heat capabilities Self adhesive for easy installation Unique material works in harsh environments Can be cut with tin snips to any shape
	Floor and Tunnel Shield 4' x 42" (14 square feet)  Item #: 050503  $158.95 This revolutionary material adds a new dimension to control heat with minimal clearance needed, only 3/16”! The Floor and Tunnel Shield is constructed utilizing an embossed 10 mil aluminum face bonded to a 1/8” composite fiberglass insulation and is backed with an aggressive adhesive that holds past 450º F. Capable of handling direct temperatures up to 1750 degrees f. Tough enough for under vehicle applications. This unique material can also block out up to 50% of unwanted road noise. Great sound barrier 1750 degree direct heat capabilities Self adhesive for easy installation Unique material works in harsh environments Can be cut with tin snips to any shape
	Heat Screen Aluminized Radiant Matting 36" by linear foot  Item #: 010090  $32.36 Heat Screen solves the problem of heat from engines and exhaust intruding into interiors and components. Withstands 1200°F of direct heat
	Heat Screen Aluminized Radiant Matting 36" x 40"  Item #: 010401  $79.95 Heat Screen is capable of withstanding direct heat up to 1000 degrees F. on one side, while protecting against radiant heat up to 2000 degrees F. on the aluminized side. Heat Screen can be used to protect the driver¡¦s compartment from excess heat; to protect areas where excessive heat can blister paint; where exhaust pipes run close to the fuel tank; and many other applications too numerous to mention. This material can be applied with a high temperature adhesive, or fastened down with screws or rivets. Aluminized surface reflects 2000 degrees F Multitude of uses around race cars, boats, RVs & trucks Great protection for painted surfaces Used in aviation and aerospace industry
	Hi-Temp Spray Adhesive  Item #: 010490  $14.95 Ideal for automotive and marine headliners, trim and laminating, Hi-Temp Spray Adhesive is formulated to bond substrates that require either high bond strength and/or needs elevated temperature resistance. Hi-Temp Spray Adhesive provides high strength adhesion and bonds a wide variety of materials, including foams, fabrics, vinyl, wood, plastics and more. It has a specially designed three-way adjustable valve allowing the user to select the spray pattern that best suits the job. This multipurpose adhesive dries quickly and clear while forming a water-resistant bond. 10 oz can
	Hub & Rotor Shield  Item #: 010485  $64.29 The Hub and Rotor Cover is designed to protect professional mechanics and backyard do-it-yourselfers alike from the potential of serious burns. Working in and around hot brake drums and rotors such as changing shocks, springs or suspensions can be a painful experience without some type of protection. It’s not just for shielding against harmful hot spots but can also act as a guard against any sharp edges and protect against dirt, dust and airborne particles around the track, shop or backyard garage. Prevents potential serious burns or cuts Aluminized mylar adhered to fiberglass matting Withstand 2000°F radiant / 500°F of direct continuous heat. Protection against dirt, dust and airborne particles around track or shop
	Muffler/Cat Heat Shield - 24`` X 40`` MYLAR  Item #: 16500  $72.95 The Muffler/Catalytic Converter Heat Shield is made up of woven silica with a flexible mylar finish. The highly-reflective heat shield can be installed between the catalytic converter, muffler, or any other component to reflect radiant heat away from the undercarriage of the car. This versatile heat shield has an unlimited number of applications. The kit includes all necessary fasteners.
	Reflect-A-Cool 12`` x 12``  Item #: 010460  $13.95 Reflect-A-Cool a sheet of reflective material with an adhesive back which offers outstanding protection against extreme heat. A combination of fiberglass and an aluminized layer of reflective foil, Reflect-A-Cool is ideal for firewalls, marine engine bays, RV dog house or in the tub of a racecar where typical mechanical fasteners cannot be used. Reflect-A-Cool will reflect up to 1000 degrees F and will protect against a direct continuous temperature of 400 degrees F. Superior protection against radiant heat Self adhesive for easy installation Can be easily trimmed and cut to fit Virtually NO clearance needed
	Reflect-A-Cool 12`` x 24``  Item #: 010461  $24.95 Reflect-A-Cool is a sheet of reflective material with an adhesive back which offers outstanding protection against extreme heat. A combination of fiberglass and an aluminized layer of reflective foil, Reflect-A-Cool is ideal for firewalls, marine engine bays, RV dog house or in the tub of a racecar where typical mechanical fasteners cannot be used. Reflect-A-Cool will reflect up to 1000 degrees F and will protect against a direct continuous temperature of 400 degrees F. Superior protection against radiant heat Self adhesive for easy installation Can be easily trimmed and cut to fit Virtually NO clearance needed
	Reflect-A-Cool 36``x48``  Item #: 010412  $63.95 Reflect-A-Cool is a sheet of reflective material with an adhesive back which offers outstanding protection against extreme heat. A combination of fiberglass and an aluminized layer of reflective foil, Reflect-A-Cool is ideal for firewalls, marine engine bays, RV, dog house or in the tub of a race car where typical mechanical fasteners cannot be used. Reflect-A-Cool will reflect up to 1000 degrees F and will protect against a direct continuous temperature of 400 degrees F. Superior protection against radiant heat Self adhesive for easy installation Can be easily trimmed and cut to fit Virtually NO clearance needed
	Reflect-A-GOLD - 1 1/2" x 15' Roll  Item #: 010394  $28.95 A high performance reflector born in the aerospace industry for use in extreme temperature swing environments. This state-of-the-art polymer material is extremely light weight and capable of handling continual operating temperatures up to 850 degrees F reflecting up to 80% of that heat. This highly conformable material is easy to install & remove and available in various configurations including rolls and cut sheets.
	Reflect-A-GOLD - 1 1/2" x 30' Roll  Item #: 010395  $58.95 A high performance reflector born in the aerospace industry for use in extreme temperature swing environments. This state-of-the-art polymer material is extremely light weight and capable of handling continual operating temperatures up to 850 degrees F reflecting up to 80% of that heat. This highly conformable material is easy to install & remove and available in various configurations including rolls and cut sheets.
	Reflect-A-GOLD - 12`` x 12`` Sheet  Item #: 010391  $19.95 A high performance reflector born in the aerospace industry for use in extreme temperature swing environments. This state-of-the-art polymer material is extremely light weight and capable of handling continual operating temperatures up to 850 degrees F reflecting up to 80% of that heat. This highly conformable material is easy to install & remove and available in various configurations including rolls and cut sheets.
	Reflect-A-GOLD - 12`` x 24`` Sheet  Item #: 010392  $29.95 A high performance reflector born in the aerospace industry for use in extreme temperature swing environments. This state-of-the-art polymer material is extremely light weight and capable of handling continual operating temperatures up to 850 degrees F reflecting up to 80% of that heat. This highly conformable material is easy to install & remove and available in various configurations including rolls and cut sheets.
	Reflect-A-GOLD - 2" x 15' Roll  Item #: 010396  $38.95 A high performance reflector born in the aerospace industry for use in extreme temperature swing environments. This state-of-the-art polymer material is extremely light weight and capable of handling continual operating temperatures up to 850 degrees F reflecting up to 80% of that heat. This highly conformable material is easy to install & remove and available in various configurations including rolls and cut sheets.
	Reflect-A-GOLD - 2" x 30' Roll  Item #: 010397  $78.95 A high performance reflector born in the aerospace industry for use in extreme temperature swing environments. This state-of-the-art polymer material is extremely light weight and capable of handling continual operating temperatures up to 850 degrees F reflecting up to 80% of that heat. This highly conformable material is easy to install & remove and available in various configurations including rolls and cut sheets.
	Reflect-A-GOLD - 24" x 150' Roll  Item #: 010390  $4,252.95 A high performance reflector born in the aerospace industry for use in extreme temperature swing environments. This state-of-the-art polymer material is extremely light weight and capable of handling continual operating temperatures up to 850 degrees F reflecting up to 80% of that heat. This highly conformable material is easy to install & remove and available in various configurations including rolls and cut sheets.
	Reflect-A-GOLD - 24`` x 24`` Sheet  Item #: 010393  $59.95 A high performance reflector born in the aerospace industry for use in extreme temperature swing environments. This state-of-the-art polymer material is extremely light weight and capable of handling continual operating temperatures up to 850 degrees F reflecting up to 80% of that heat. This highly conformable material is easy to install & remove and available in various configurations including rolls and cut sheets.
	Starter Heat Shield - 7`` X 22``  Item #: 14150  $39.95 In today's high-heat environment, starters take in a lot of damaging heat that destroys the windings of the starter and solenoid. To combat this problem, Thermo-Tec created a non-conductive strap-on heat shield with a highly-reflective mylar surface. The Starter Heat Shield will reflect over 90% of radiant heat, adding life to the starter and assuring reliable starts. The Starter Heat Shield is a universal kit that fits all starters.
	Turbo Insulation Kit-Universal  Item #: 010113  $95.95 This turbo kit is designed to fit all turbos from the sport compact turbos to the large over the road trucks. Designed to reduce turbo lag and reduce under hood temperatures, the Turbo Insulation Kit adds additional horsepower while protecting costly components from unwanted heat. The kit comes complete with all the materials necessary for a clean, professional looking installation. Designed to reduce turbo lag and under hood temperatures Universal application to fit all turbos Greatly reduces underhood temperatures Easy to install for professional look
	Versa-Shield Universal Heat Shield 7``x24``  Item #: 010402  $34.05 Originally designed to protect starters from heat, Versa-Shield™ can also be used to protect cool cans, carburetors, fuel pumps and many more areas of a car, boat, RV or heavy-duty truck. It has also been found helpful for shielding electrical boxes and instruments from intense heat. Versa-Shield can easily be cut to shape, and attaches to itself with hook and loop material. Versa-Shield will fit most starter assemblies. Simply cut off excess material with scissors or a sharp knife. For use around starter, carburetor, fuel pump, cool can, master cylinders & more The only starter shield with hook & loop closure Easily cut to size with scissors or a sharp knife. Controls starter heat soak- “No Start”

Email questions to: Service@1FastCar.com